- Philips M2601A S03 (EASI) ECG Telemetry Transmitter
- The Philips IntelliVue Telemetry System uses a cellular architecture to provide two-way communications between patient-worn transceivers and the IntelliVue Information Center. The Philips IntelliVue Telemetry System consists of two types of transceivers (portable patient-worn devices) - one with integrated ECG & SpO 2 named.
- Monitoring System, as well as the Philips Neonatal CMS Patient Monitoring System will be referred to throughout this guide as the CMS. Target Audience This reference guide is intended for hospital Biomedical Engineers and Technicians, Philips Customer Engineers, Response Center Engineers, and Installation Planning Specialists who have.
- Based on staff needs, Philips offers IntelliVue monitor courses varying in length and complexity. The Essentials Course is designed for staff new to Philips monitors, or those who need a refresher. The course consists of lecture, demonstration and hands-on lab work using your equipment, and is.
Refurbished
2.00 LBS
Ships in 24 hours
Service and Specifications The following parts can be ordered by contacting your local Philips Medical Systems Sales Office or your authorized Philips Medical Systems Dealer or Distributor. Description Philips P/N USB Dual Dock 11 Patient diaries (200) M4701A 24-inch patient cable (lead set). Refer to the your Philips Telemetry System Instructions for Use manual. The on-line Information Center Help provides a Quick Guide for completing basic tasks and troubleshooting problems. The on-line Quick Guide also provides user information for the Philips Telemetry System.
Calculated at checkout
Product Description
The Philips M2601A Telemetry system transmitter sends continuous ECG and SpO2 measurements to the IntelliVue Information Center, where the measurements are captured, analyzed, displayed, and stored.
The basic setup comes with 3-lead or 5-lead capability. The ECG-only transmitter is particularly light and comfortable for patients. Upgraded transmitters combine standard and EASI derived 12-lead ECG monitoring on a single device, run on easily replaceable AA batteries, and provide audio feedback for many tasks, including “power on” and SpO2 spot check.
The basic setup comes with 3-lead or 5-lead capability. The ECG-only transmitter is particularly light and comfortable for patients. Upgraded transmitters combine standard and EASI derived 12-lead ECG monitoring on a single device, run on easily replaceable AA batteries, and provide audio feedback for many tasks, including “power on” and SpO2 spot check.
Features:
- Frequency of 460-480 MHz or 608-614 MHz WMTS
- Lightweight—less than ½ lb.
- Standard ECG configuration with 3- or 5-lead capability
- EASI ECG configuration used for transmitters that work with central stations that are capable of converting a 5-wire lead set signal to 12 lead analysis by having EASI version software installed at the central station.
- SpO2 configuration used for transmitters that are used with SpO2 sensors.
Philips 5 Lead Dual ECG Leadwire - Snap ($55)
Philips 5 Lead Single Pin w/Tele Shield ECG Leadwires - Grabber ($95)
Add SpO2 Probe (Only Available with S02 Model):
![Monitor Monitor](/uploads/1/1/7/8/117810554/946807175.jpg)
Warranty Information
Find Similar Products by Category
![Philips intellivue telemetry mx40 monitor Philips intellivue telemetry mx40 monitor](/uploads/1/1/7/8/117810554/899057375.jpg)
Product Reviews
Please enable JavaScript to view the comments powered by Disqus.